Product Details:
Payment & Shipping Terms:
|
China cheap tunig fork switch For Granular Solid and liquid
Product description:
Tuning fork level switch is a kind of new control switch, which is mainly depend on the tuning fork through
the vibration principle to measure the level of material. Through the installation of the tuning fork on the
base of the tuning fork vibration of a piezoelectric crystal in the resonance frequency. When the tuning
fork and the medium contact, tuning fork frequency and amplitude changes, these changes are detected by
the intelligent circuit, and converts it into a switch signal.
Technical Parameters
| medium temperature range | -20 ° C to 220 ° C |
| ambient temperature | -20 ° C to 80 ° C |
| ambient humidity | ≤ 95% RH |
| measured medium | liquid, powder or granular solid |
| measured medium density | solid ≥ 0.1g/cm3, liquid ≥ 0.7g/cm3 |
| measured solid particle size | ≤ 10mm |
| maximum liquid viscosity |
<1000mm2 / s
|
| measured medium repose angle | ≥ 200 |
| pressure range | ≤ 1MPa |
| shell material | die-casting aluminum alloy |
| fork material | 1Cr18Ni9Ti |
| shell protection | IP65 |
| connection |
1 "NPT thread / flange (two ways) |
| electrical parameters |
1: supply voltage: 24 V DC; 220V AC 50Hz 2: output signal: relay output double-pole double- throw (DPDT) contact capacity: 8A 220V AC 4A 24V DC 3: power consumption: ≤ 2W |
| tuning fork vibration frequency | 300 ± 500HZ |
Tuning Fork Switch Ordering Information Sheet
| Model | Name |
| AFTL | Tuning Fork Switch |
| Code | Power Supply |
| 1 | 220V AC |
| 2 | 24V DC |
| Code | Temperature Type |
| H | High Temperature Type |
| S | Common Type |
| Code | Fork Sort |
| A | Standard Type |
| C | Shock Rod Type |
| S | Compact Type |
| Code | Fork Type and Insertion Dept h Range |
| G1 | Small Fork 45mm~3000mm |
| G2 | Standard Fork 100mm~3000mm |
| Code | Process Connection/Material |
| N1 | 1″ NPT thread/316ss |
| G1 | G1″ thread/316ss |
| D25 | DN25 PN4.0MPa/316ss |
| D40 | DN40 PN4.0MPa/316ss |
| D50 | DN50 PN4.0MPa/316ss |
| TC1 | 1″ Clamp/316ss |
| TC2 | 2″ Clamp/316ss |
| Code | Shell/Cable Interface Size |
| A1 | Die-cast Aluminum Shell Explosion-proof IP67/NPT 3/4″ |
| A2 | 316ss Shell Explosion-proof IP67/M20X1.5 |
| Customers Supply | Insertion Length |
Product details:
Installation:
| Factory Address:No.340 Changjiang Road, ETDZ,Yantai,Shandong,China | |
| Sales office:No.3 Hengshan Road, ETDZ,Yantai,Shandong,China | |
| +86--13145357370 | |
| summerinstrument@188.com | |
