Product Details:
Payment & Shipping Terms:
|
| Accuracy: | 0.2%FS,0.5%FS | Current Output: | 4 - 20 MA |
|---|---|---|---|
| Process Connection:: | 1/2NPT; 1/4NP/M20X1.5 Or As Required | Temperature: | 20~85℃ |
| Application: | Water Oil Air Pressure Measurement | Shell/housing:: | Aluminium Alloy |
Yantai Auto SP Pressure Sensor 4-20mA China Manufacturer gas pressure transmitter
Pressure Sensor/Pressure Transmitter
SP series pressure transmitter is the introduction of foreign technology and products produced using imported components, can be used to process fluid (liquid, gas) measured continuously changes. Will be converted into a 4-20mA standard current measured pressure signal output, and combined with other monitoring and control units, constitute automatic control system. Widely used in petroleum, chemical, metallurgy, electricity, medicine, beer, water treatment and other industries process monitoring and control.
Technical Parameter
| Accuracy | 0.2%FS,0.5%FS |
| Stability | Better than 0.25%FS annually |
| Installation location influence | No impact |
| Temperature influence(-50~50℃) | Less ±0.15%/10℃ |
| Working voltage | 15V~30V DC |
| Ambient temperature | -20~85℃ |
| Medium temperature | -40~120℃ |
| Storage temperature | -40~110℃ |
| Compensation temperature | -15~50℃ |
| Wetted diaphragm | SS316L, ceramic |
| Process connection element | Stainless steel |
| Sealing element | fluororubber |
| Shell/housing | stainless steel, aluminium alloy |
| Protection | IP65 |
Order sheet
| Name | Specification code | Explanation |
| sp | Pressure Transmitter | |
|
Process Connection Material |
1 | Stainless Steel |
| Process Connection | R | G1/2″ , G1/4'' |
| M | 1/4'' NPT M, 1/2'' NPT M | |
| Y | Customize | |
| Sealing Material | IF | fluoro rubber(standard) |
| IH | fluoro rubber applied to Sensors(Over 10MPa) | |
|
Electronic Components of Transmitters |
2 | Analog signal 4-20mA (two wire) |
| 3 | customize | |
| Shell material and structure | A | Aluminum shell PG16 cable sealingIP65 |
| B | Stainless steel shell cylinder structure | |
|
Sensor Type |
0 | Diffused Silicon Type |
| 1 | Diffusion silicon anti-corrosion type | |
|
Explosion-proof Requirements |
D | No Explosion-proof Required |
| E | Explosion-proof type | |
| Accuracy | 2 | 0.2% |
| 5 | 0.5% |
Pressure Sensor Detailed Pictures
Company Show
Different Models Available
CE & ISO9001 Certification
our other type pressure transmitter and level transmitter
| Factory Address:No.340 Changjiang Road, ETDZ,Yantai,Shandong,China | |
| Sales office:No.3 Hengshan Road, ETDZ,Yantai,Shandong,China | |
| +86--13145357370 | |
| summerinstrument@188.com | |
