Product Details:
Payment & Shipping Terms:
|
Output Signal: | 4-20mA/HART | Power Supply: | 9-36V DC |
---|---|---|---|
Operating Temperature: | -40 To +140C | Skype: | Summer.cao39 |
Name: | Level Transmitter | Process Fluid: | Liquid, Gas, Vapor |
Flange Size: | 2''3''4'' |
Introduction
Differential pressure transmitter/pressure transmitter is a measure of the difference between the two ends of the transmitter ,output standard signal (eg 4 ~ 20mA, 1-5V) differential pressure transmitter and pressure transmitter with the general difference is that there are two pressure ports, the differential pressure transmitter is generally divided into positive and negative terminal end, under normal circumstances, Positive pressure side pressure should be greater than the negative pressure section. .
Features:
1. Process Fluid: Liquid
2. Applicat ion: Liquid level measurement, differential pressure measurement
3. Working Temperature: -25 to +95C
4. Current Output: 4 - 20 mA 2 wires Har t Protocol
5. Power Supply: 24VDC
6. Ambient Temperature: -25 to +240C
7. Process connections: flange 2'' 3'', tri clamp
8. Electrical Connections: 1/2"NPT or M20*1.5
9. Enclosure:IP65
10.Intrinsically Safe: Exia II C T6 11.Explosion proof: Exd II B T5
Order Sheet:
Item | Code | Specification |
AT3051LT | Smart Level Transmitter | |
Measurement Range | 3 | 0-4~7.5 Kpa |
4 | 0~37.4 Kpa | |
5 | 0~186.8 Kpa | |
6 | 0~690 Kpa | |
7 | 0~2068 Kpa | |
Output | S | 4-20mA, HART Protocol, Linear output |
Sensor Diaphragm Material / Fill Fluid |
2 | Stainless Steel 316L Silicone Oil |
3 | Hastelloy C Silicone Oil | |
A | Stainless Steel 316L Fluorine oil | |
Drain hole | B | Back of process flange or none |
U | Process flange side upper | |
L | Process flange side lower | |
Wetted O-ring Material | 7 | Buna-N (NBR) |
6 | Viton (FKM) (Temperature ≥-20ºC) | |
5 | Low Temperature Viton (FKM-GFLT) | |
Cable Entry | 1 | M20*1.5 |
Process Connection | C | 2'' ANSI 150# |
D | 2'' ANSI 300# | |
J | 2'' ANSI 600# | |
E | 3'' ANSI 150# | |
F | 3'' ANSI 300# | |
K | 3'' ANSI 600# | |
G | 4'' ANSI 150# | |
H | 4'' ANSI 300# | |
Q | DN50 PN1.6MPa/4Mpa | |
R | DN50 PN6.4Mpa | |
M | DN50 PN10Mpa | |
S | DN80 PN1.6MPa/4Mpa | |
T | DN80 PN6.4Mpa | |
N | DN80 PN10Mpa | |
U | DN100 PN1.6MPa/4Mpa | |
W | DN100 PN6.4Mpa | |
Flange Diaphragm Material | A | Stainless steel 316L |
B | Hastelloy C | |
C | Tantalum | |
E | PFA coating | |
F | F46 coating | |
G | Gold-plated | |
Insert Tube Length | 0 | 0 |
1 | 50mm | |
2 | 100mm | |
3 | 150mm | |
Fill Fluid(High pressure side) | A | Silicone Oil |
C | Fluorine oil | |
Optional | d | Intrinsically safe type, Flameproof (Exd IIC T4~T6) |
i | Intrinsically safe (Exia IIC T4~T6) | |
M3 | LCD display | |
D1 | Stainless steel drain valve or screw (2pcs) | |
C1 | 1/2'' NPT female waist flange (2sets) | |
C12 | 1/2'' NPT-M20*1.5-Φ14 pressure pipe (2sets) | |
C2 | M20*1.5 male thread T joint (2sets) | |
C21 | M20*1.5 T joint -Φ14 pressure pipe (2sets) | |
K1 | Degreasing treatment |
Company and Production Line
PLEASE CONTACT ME FOR PRICE, THANKS